[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR57.4263]

[Page 324-325]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 57--SAFETY AND HEALTH STANDARDS--UNDERGROUND METAL AND NONMETAL MINES--Table of Contents
 
                 Subpart C--Fire Prevention and Control
 
Sec. 57.4263  Underground belt conveyors.

    Fire protection shall be provided at the head, tail, drive, and 
take-up pulleys of underground belt conveyors. Provisions shall be made 
for extinguishing fires along the beltline. Fire protection shall be of 
a type, size, and

[[Page 325]]

quantity that can extinguish fires of any class in their early stages 
which could occur as a result of the fire hazards present.

                  Firefighting Procedures/Alarms/Drills