[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR7.29]

[Page 19]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 7--TESTING BY APPLICANT OR THIRD PARTY--Table of Contents
 
            Subpart B--Brattice Cloth and Ventilation Tubing
 
Sec. 7.29  Approval marking.

    (a) Approved brattice cloth shall be legibly and permanently marked 
with the assigned MSHA approval number at intervals not exceeding ten 
feet. If the nature of the material or method of processing makes such 
marking impractical, permanent paint or ink may be used to mark the edge 
with an MSHA-assigned color code.
    (b) Approved ventilation tubing shall be legibly and permanently 
marked on each section with the assigned MSHA approval number.
    (c) An approved product shall be marketed only under a brand or 
trade name that has been furnished to MSHA.