[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR74.8]

[Page 446-447]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 74--COAL MINE DUST PERSONAL SAMPLER UNITS--Table of Contents
 
Sec. 74.8  Approval labels.

    (a) Certificates of approval will be accompanied by photographs of 
designs for the approval labels to be affixed to each coal mine dust 
personal sampler unit.
    (b) The labels showing approval by the National Institute for 
Occupational Safety and Health and by MSHA shall contain such 
information as MSHA or Institute may require and shall be reproduced 
legibly on the outside of a sampler unit as directed by the appropriate 
bureau.

[[Page 447]]

    (c) The applicant shall submit full-scale designs or reproductions 
of approval labels and a sketch or description of the position of the 
labels on each unit.
    (d) Use of the approval labels obligates the applicant to whom the 
certificates of approval were issued to maintain the quality of the 
complete coal mine dust personal sampler unit and to guarantee that the 
complete sampler unit is manufactured or assembled according to the 
drawings and specifications upon which the certificates of approval were 
based. Use of the approval labels is authorized only on sampler units 
which conform strictly with the drawings and specifications upon which 
the certificates of approval were based.

[35 FR 4326, Mar. 11, 1970, as amended at 37 FR 26712, Dec. 15, 1972]