[Code of Federal Regulations]
[Title 40, Volume 20]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR158.170]

[Page 95]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 158--DATA REQUIREMENTS FOR REGISTRATION--Table of Contents
 
             Subpart C--Product Chemistry Data Requirements
 
Sec. 158.170  Preliminary analysis.

    (a) If the product is produced by an integrated system, the 
applicant must provide a preliminary analysis of each technical grade of 
active ingredient contained in the product to identify all impurities 
present at 0.1 percent or greater of the TGAI. The preliminary analysis 
should be conducted at the point in the production process after which 
no further chemical reactions designed to produce or purify the 
substance are intended.
    (b) Based on the preliminary analysis, a statement of the 
composition of the technical grade of active ingredient must be 
provided. If the technical grade of active ingredient cannot be 
isolated, a statement of the composition of the practical equivalent of 
the technical grade of active ingredient must be submitted.

[[Page 96]]