[Code of Federal Regulations] [Title 40, Volume 27] [Revised as of July 1, 2002] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR761.19] [Page 556] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 761--POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, DISTRIBUTION IN COMMERCE, AND USE PROHIBITIONS--Table of Contents Subpart A--General Sec. 761.19 References. (a) [Reserved] (b) Incorporation by reference. The following material is incorporated by reference, and is available for inspection at the Office of the Federal Register, 800 North Capitol St., NW., Suite 700, Washington, DC. These incorporations by reference were approved by the Director of the Office of the Federal Register. These materials are incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the Federal Register. Copies of the incorporated material are available for inspection at the TSCA Nonconfidential Information Center (7407), Rm. B607, Northeast Mall, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 401 M St., SW., Washington, DC 20460. Copies of the incorporated material may be obtained from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. ------------------------------------------------------------------------ References CFR Citation ------------------------------------------------------------------------ ASTM D 93 - 90 Standard Test Sec. 761.71(b)(2)(vi); Sec. Methods for Flash Point by Pensky- 761.75(b)(8)(iii) Martens Closed Tester. ASTM D 129-64 (Reapproved 1978) Sec. 761.71(b)(2)(vi) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method). ASTM D 240-87 Standard Test Method Sec. 761.71(b)(2)(vi) for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter. ASTM D 482-87 Standard Test Method Sec. 761.71(b)(2)(vi) for Ash from Petroleum Products. ASTM D 524-88 Standard Test Method Sec. 761.71(b)(2)(vi) for Ramsbottom Carbon Residue of Petroleum Products. ASTM D 808-87 Standard Test Method Sec. 761.71(b)(2)(vi) for Chlorine in New and Used Petroleum Products (Bomb Method). ASTM D 923-86 Standard Test Method Sec. 761.60(g)(1)(ii); (g)(2)(ii) for Sampling Electrical Insulating Liquids. ASTM D 923-89 Standard Methods of Sec. 761.60(g)(1)(ii); (g)(2)(ii) Sampling Electrical Insulating Liquids. ASTM D 1266-87 Standard Test Method Sec. 761.71(b)(2)(vi) for Sulfur in Petroleum Products (Lamp Method). ASTM D 1796-83 (Reapproved 1990) Sec. 761.71(b)(2)(vi) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure). ASTM D 2158-89 Standard Test Method Sec. 761.71(b)(2)(vi) for Residues in Liquified Petroleum (LP) Gases. ASTM D 2709-88 Standard Test Method Sec. 761.71(b)(2)(vi) for Water and Sediment in Distillate Fuels by Centrifuge. ASTM D 2784-89 Standard Test Method Sec. 761.71(b)(2)(vi) for Sulfur in Liquified Petroleum Gases (Oxy-hydrogen Burner or Lamp). ASTM D 3178-84 Standard Test Sec. 761.71(b)(2)(vi) Methods for Carbon and Hydrogen in the Analysis Sample of Coke and Coal. ASTM D 3278-89 Standard Test Sec. 761.75(b)(8)(iii) Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus. ASTM E 258-67 (Reapproved 1987) Sec. 761.71(b)(2)(vi) Standard Test Method for Total Nitrogen Inorganic Material by Modified KJELDAHL Method. ------------------------------------------------------------------------ [47 FR 22098, May 21, 1982, as amended at 49 FR 29067, July 18, 1984; 49 FR 36648, Sept. 19, 1984; 53 FR 10391, Mar. 31, 1988; 53 FR 12524, Apr. 15, 1988; 53 FR 21641, June 9, 1988; 57 FR 13323, Apr. 16, 1992; 59 FR 33697, June 30, 1994; 60 FR 34465, July 3, 1995; 63 FR 35439, June 29, 1998; 64 FR 33759, June 24, 1999] [[Page 557]]