[Code of Federal Regulations]
[Title 49, Volume 2]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR173.116]
[Page 476]
TITLE 49--TRANSPORTATION
CHAPTER I--RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF
TRANSPORTATION
PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS--Table of Contents
Subpart D--Definitions Classification, Packing Group Assignments and
Exceptions for Hazardous Materials Other Than Class 1 and Class 7
Sec. 173.116 Class 2--Assignment of hazard zone.
(a) The hazard zone of a Class 2, Division 2.3 material is assigned
in column 7 of the Sec. 172.101 table. There are no hazard zones for
Divisions 2.1 and 2.2. When the Sec. 172.101 table provides more than
one hazard zone for a Division 2.3 material, or indicates that the
hazard zone be determined on the basis of the grouping criteria for
Division 2.3, the hazard zone shall be determined by applying the
following criteria:
------------------------------------------------------------------------
Hazard zone Inhalation toxicity
------------------------------------------------------------------------
A................................ LC50 less than or equal to 200 ppm.
B................................ LC50 greater than 200 ppm and less
than or equal to 1000 ppm.
C................................ LC50 greater than 1000 ppm and less
than or equal to 3000 ppm.
D................................ LC50 greater than 3000 ppm or less
than or equal to 5000 ppm.
------------------------------------------------------------------------
(b) The criteria specified in paragraph (a) of this section are
represented graphically in Sec. 173.133, Figure 1.
[Amdt. 173-224, 55 FR 52634, Dec. 21, 1990, as amended at 56 FR 66268,
Dec. 20, 1991; Amdt. 173-138, 59 FR 49133, Sept. 26, 1994; 67 FR 61013,
Sept. 27, 2002]