[Code of Federal Regulations]
[Title 49, Volume 2]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR178.33-9]

[Page 764-765]
 
                        TITLE 49--TRANSPORTATION
 
 CHAPTER I--RESEARCH AND SPECIAL PROGRAMS ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 178--SPECIFICATIONS FOR PACKAGINGS--Table of Contents
 
      Subpart B--Specifications for Inside Containers, and Linings
 
Sec. 178.33-9  Marking.

    (a) By means of printing, lithographing, embossing, or stamping, 
each container must be marked to show:
    (1) DOT-2P.
    (2) Name or symbol of person making the mark specified in paragraph 
(a)(1) of this section. Symbol, if used, must

[[Page 765]]

be registered with the Associate Administrator.
    (b) [Reserved]

[Amdt. 178-40, 41 FR 38181, Sept. 9, 1976, as amended by Amdt. 178-97, 
56 FR 66287, Dec. 20, 1991; 66 FR 45386, Aug. 28, 2001]