[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR213.123]

[Page 111]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 213--TRACK SAFETY STANDARDS--Table of Contents
 
                       Subpart D--Track Structure
 
Sec. 213.123  Tie plates.

    (a) In Classes 3 through 5 track where timber crossties are in use 
there shall be tie plates under the running rails on at least eight of 
any 10 consecutive ties.
    (b) In Classes 3 through 5 track no metal object which causes a 
concentrated load by solely supporting a rail shall be allowed between 
the base of the rail and the bearing surface of the tie plate. This 
paragraph (b) is applicable September 21, 1999.)