[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR230.30]

[Page 327-328]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 230--STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table of Contents
 
                  Subpart B--Boilers and Appurtenances
 
Sec. 230.30  Lap-joint seam boilers.

    Every boiler having lap-joint longitudinal seams without reinforcing 
plates

[[Page 328]]

shall have sufficient lagging, jacketing, flues, and tubes removed at 
every annual inspection so that an inspection of the entire joint, 
inside and out, can be made, taking special care to detect grooving or 
cracks at the edges of the seams.