[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR230.37]

[Page 329-330]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 230--STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table of Contents
 
                  Subpart B--Boilers and Appurtenances
 
Sec. 230.37  Steam test following repairs or alterations.

    Upon completion of any repair or alteration, the locomotive owner 
and/or operator shall conduct a steam test of the boiler with steam 
pressure raised to between 95 percent and 100 percent of the MAWP. At 
this time, the boiler shall be inspected to ensure that it is in a safe 
and suitable condition for service.

[[Page 330]]

                                Staybolts