[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR392.9]

[Page 1026-1027]
 
                        TITLE 49--TRANSPORTATION
 
        CHAPTER III--FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION,
                      DEPARTMENT OF TRANSPORTATION
 
PART 392--DRIVING OF COMMERCIAL MOTOR VEHICLES--Table of Contents
 
                           Subpart A--General
 
Sec. 392.9  Safe loading.

    (a) General. No person shall drive a commercial motor vehicle and a 
motor carrier shall not require or permit a person to drive a commercial 
motor vehicle unless--
    (1) The commercial motor vehicle's cargo is properly distributed and 
adequately secured as specified in Secs. 393.100-393.106 of this 
subchapter.
    (2) The commercial motor vehicle's tailgate, tailboard, doors, 
tarpaulins, its spare tire and other equipment used in its operation, 
and the means of fastening the commercial motor vehicle's cargo are 
secured; and
    (3) The commercial motor vehicle's cargo or any other object does 
not obscure the driver's view ahead or to the right or left sides, 
interfere with the free movement of his/her arms or legs, prevent his/
her free and ready access to accessories required for emergencies, or 
prevent the free and ready exit of any person from the commercial motor 
vehicle's cab or driver's compartment.
    (b) Drivers of trucks and truck tractors. Except as provided in 
paragraph (b)(4) of this section, the driver of a truck or truck tractor 
must--
    (1) Assure himself/herself that the provisions of paragraph (a) of 
this section have been complied with before he/she drives that 
commercial motor vehicle;
    (2) Examine the commercial motor vehicle's cargo and its load-
securing devices within the first 25 miles after beginning a trip and 
cause any adjustments to be made to the cargo or load-securing devices 
(other than steel strapping) as may be necessary to maintain the 
security of the commercial motor vehicle's load; and
    (3) Reexamine the commercial motor vehicle's cargo and its load-
securing devices periodically during the course of transportation and 
cause any adjustments to be made to the cargo or load-securing devices 
(other than steel strapping) as may be necessary to

[[Page 1027]]

maintain the security of the commercial motor vehicle's load. A periodic 
reexamination and any necessary adjustments must be made--
    (i) When the driver makes a change of his/her duty status; or
    (ii) After the commercial motor vehicle has been driven for 3 hours; 
or
    (iii) After the commercial motor vehicle has been driven for 150 
miles, whichever occurs first.
    (4) The rules in this paragraph do not apply to the driver of a 
sealed commercial motor vehicle who has been ordered not to open it to 
inspect its cargo or to the driver of a commercial motor vehicle that 
has been loaded in a manner that makes inspection of its cargo 
impracticable.

[36 FR 18863, Sept. 23, 1971, as amended at 37 FR 12642, June 27, 1972; 
38 FR 23522, Aug. 31, 1973; 60 FR 38746, July 28, 1995; 63 FR 33278, 
June 18, 1998]

    Effective Date Note: At 67 FR 61224, Sept. 27, 2002, Sec. 392.9 was 
revised effective December 26, 2002. For the convenience of the user, 
the revised text is set forth as follows.

Sec. 392.9  Inspection of cargo, cargo securement devices and systems.

    (a) General. A driver may not operate a commercial motor vehicle and 
a motor carrier may not require or permit a driver to operate a 
commercial motor vehicle unless--
    (1) The commercial motor vehicle's cargo is properly distributed and 
adequately secured as specified in Secs. 393.100 through 393.142 of this 
subchapter.
    (2) The commercial motor vehicle's tailgate, tailboard, doors, 
tarpaulins, spare tire and other equipment used in its operation, and 
the means of fastening the commercial motor vehicle's cargo, are 
secured; and
    (3) The commercial motor vehicle's cargo or any other object does 
not obscure the driver's view ahead or to the right or left sides 
(except for drivers of self-steer dollies), interfere with the free 
movement of his/her arms or legs, prevent his/her free and ready access 
to accessories required for emergencies, or prevent the free and ready 
exit of any person from the commercial motor vehicle's cab or driver's 
compartment.
    (b) Drivers of trucks and truck tractors. Except as provided in 
paragraph (b)(4) of this section, the driver of a truck or truck tractor 
must--
    (1) Assure himself/herself that the provisions of paragraph (a) of 
this section have been complied with before he/she drives that 
commercial motor vehicle;
    (2) Inspect the cargo and the devices used to secure the cargo 
within the first 50 miles after beginning a trip and cause any 
adjustments to be made to the cargo or load securement devices as 
necessary, including adding more securement devices, to ensure that 
cargo cannot shift on or within, or fall from the commercial motor 
vehicle; and
    (3) Reexamine the commercial motor vehicle's cargo and its load 
securement devices during the course of transportation and make any 
necessary adjustment to the cargo or load securement devices, including 
adding more securement devices, to ensure that cargo cannot shift on or 
within, or fall from, the commercial motor vehicle. Reexamination and 
any necessary adjustments must be made whenever --
    (i) The driver makes a change of his/her duty status; or
    (ii) The commercial motor vehicle has been driven for 3 hours; or
    (iii) The commercial motor vehicle has been driven for 150 miles, 
whichever occurs first.
    (4) The rules in this paragraph (b) do not apply to the driver of a 
sealed commercial motor vehicle who has been ordered not to open it to 
inspect its cargo or to the driver of a commercial motor vehicle that 
has been loaded in a manner that makes inspection of its cargo 
impracticable.