[Code of Federal Regulations]
[Title 49, Volume 5]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR572.31]

[Page 780-781]
 
                        TITLE 49--TRANSPORTATION
 
                            OF TRANSPORTATION
 
PART 572--ANTHROPOMORPHIC TEST DEVICES--Table of Contents
 
                    Subpart E--Hybrid III Test Dummy
 
Sec. 572.31  General description.

    (a) The Hybrid III 50th percentile size dummy consists of components 
and assemblies specified in the Anthropomorphic Test Dummy drawing and 
specifications package which consists of the following six items:
    (1) The Anthropomorphic Test Dummy Parts List, dated June 26, 1998, 
and containing 16 pages, and a Parts List Index, dated June 26, 1998, 
containing 8 pages.
    (2) A listing of Hybrid III Dummy Transducers-reference document 
AGARD-AR-330, ``Anthropomorphic Dummies for Crash and Escape System 
Testing'', Chapter 6, Table 6-2, North Atlantic Treaty Organization, 
July, 1996.
    (3) A General Motors Drawing Package identified by GM Drawing No. 
78051-218, revision U, titled ``Hybrid III Anthropomorphic Test Dummy,'' 
dated August 30, 1998, the following component assemblies, and 
subordinate drawings:

------------------------------------------------------------------------
                          Drawing No.                           Revision
------------------------------------------------------------------------
78051-61X head assembly-complete, (May 20, 1978)..............       (T)
78051-90 neck assembly-complete, dated May 20, 1978...........       (A)
78051-89 upper torso assembly-complete, dated May 20, 1978....       (K)
78051-70 lower torso assembly-complete, dated June 30, 1998,         (F)
 except for drawing No. 78051-55, ``Instrumentation Assembly-
 Pelvic Accelerometer,'' dated August 2, 1979.................

[[Page 781]]


86-5001-001 leg assembly-complete (LH), dated March 26, 1996..       (A)
86-5001-002 leg assembly-complete (RH), dated March 26, 1996..       (A)
78051-123 arm assembly-complete (LH), dated May 20, 1996......       (D)
78051-124 arm assembly-complete (RH), dated May 20, 1978......       (D)
78051-59 pelvic assembly-complete, dated June 30, 1998........       (G)
78051-60 pelvic structure-molded, dated June 30, 1998.........       (E)
------------------------------------------------------------------------

    (4) Disassembly, Inspection, Assembly and Limbs Adjustment 
Procedures for the Hybrid III dummy, dated June 1998.
    (5) Sign Convention for signal outputs--reference document SAE J1733 
Information Report, titled ``Sign Convention for Vehicle Crash 
Testing'', dated 1994-12.
    (6) Exterior dimensions of the Hybrid III dummy, dated July 15, 
1986.
    (b) [Reserved]
    (c) Adjacent segments are joined in a manner such that throughout 
the range of motion and also under crash-impact conditions, there is no 
contact between metallic elements except for contacts that exist under 
static conditions.
    (d) The weights, inertial properties and centers of gravity location 
of component assemblies shall conform to those listed in drawing 78051-
338, revision S, titled ``Segment Weights, Inertial Properties, Center 
of Gravity Location--Hybrid III,'' dated May 20, 1978 of drawing No. 
78051-218.
    (e) The structural properties of the dummy are such that the dummy 
conforms to this part in every respect both before and after being used 
in vehicle test specified in Standard No. 208 of this chapter 
(Sec. 571.208).

[51 FR 26701, July 25, 1986, as amended at 53 FR 8764, Mar. 17, 1988; 57 
FR 47010, Oct. 14, 1992; 61 FR 67955, Dec. 26, 1996; 62 FR 27514, May 
20, 1997; 63 FR 5747, Feb. 4, 1998; 63 FR 53851, Oct. 7, 1998]