[Code of Federal Regulations]
[Title 14, Volume 1]
[Revised as of January 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR45.16]

[Page 869]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
 
PART 45--IDENTIFICATION AND REGISTRATION MARKING--Table of Contents
 
       Subpart B--Identification of Aircraft and Related Products
 
Sec. 45.16  Marking of life-limited parts.

    When requested by a person required to comply with Sec. 43.10 of 
this chapter, the holder of a type certificate or design approval for a 
life-limited part must provide marking instructions, or must state that 
the part cannot be practicably marked without compromising its 
integrity. Compliance with this paragraph may be made by providing 
marking instructions in readily available documents, such as the 
maintenance manual or the Instructions for Continued Airworthiness.

[Doc. No. FAA-200-8017, 67 FR 2110, Jan. 15, 2002]