[Code of Federal Regulations]
[Title 19, Volume 1]
[Revised as of April 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 19CFR115.29]

[Page 528]
 
                        TITLE 19--CUSTOMS DUTIES
 
  CHAPTER I--UNITED STATES CUSTOMS SERVICE, DEPARTMENT OF THE TREASURY
 
PART 115--CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS--Table of Contents
 
     Subpart C--Procedures for Approval of Containers by Design Type
 
Sec. 115.29  Plan review.

    (a) A manufacturer or owner who wants containers to be approved by 
design type must submit the plans and specifications for the container 
to the Certifying Authority.
    (b) The Certifying Authority examining the plans and specifications 
submitted in accordance with paragraph (a) of this section shall:
    (1) Approve the plans and specifications in accordance with the 
requirements of Sec. 115.30 and arrange to inspect a container in 
accordance with Sec. 115.31; or
    (2) Advise the applicant of any necessary changes to be made for 
compliance with the requirements of Sec. 115.30.
    (c) If changes in the design of the container are made during 
production but after approval of the plans and specifications by the 
Certifying Authority and furnish it with ``as-built'' drawings of the 
container so that the plans can be reviewed and one or more containers 
inspected during the production stage to confirm that they continue to 
comply with the requirements of Sec. 115.30.