[Code of Federal Regulations]
[Title 19, Volume 1]
[Revised as of April 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 19CFR115.63]

[Page 531-532]
 
                        TITLE 19--CUSTOMS DUTIES
 
  CHAPTER I--UNITED STATES CUSTOMS SERVICE, DEPARTMENT OF THE TREASURY
 
PART 115--CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS--Table of Contents
 
   Subpart F--Procedures for Approval of Road Vehicles by Design Type
 
Sec. 115.63  Application for approval.

    Each application by a manufacturer for certification of a road 
vehicle by design type must include:
    (a) Three copies, each no larger than 3 feet by 4 feet, of the 
Customs and TIR plan;
    (b) Customs and TIR plan number;
    (c) Three copies of the specifications which include the following 
information:
    (1) The name and address of the manufacturer and the owner; and
    (2) A description of the road vehicle including the:
    (i) Particulars of construction;
    (ii) Dimensions;
    (iii) Construction materials; and
    (iv) Marks and numbers, including chassis, engine, and registration 
numbers.
    (d) A statement signed by the manufacturer that:
    (1) It will present vehicles of the type concerned to the Certifying 
Authority which that Authority may wish to examine;
    (2) Permit the Certifying Authority to examine further units at any 
time during or after the production run;

[[Page 532]]

    (3) Notify the Certifying Authority of each change in the design or 
specifications before adoption;
    (4) Mark the road vehicles in a visible place with the 
identification number or letters of the design type and the serial 
number of the vehicle in the type series manufacturer's number; and
    (5) Keep a record of vehicles manufactured according to the design 
type.