[Code of Federal Regulations]
[Title 19, Volume 1]
[Revised as of April 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 19CFR115.64]

[Page 532]
 
                        TITLE 19--CUSTOMS DUTIES
 
  CHAPTER I--UNITED STATES CUSTOMS SERVICE, DEPARTMENT OF THE TREASURY
 
PART 115--CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS--Table of Contents
 
   Subpart F--Procedures for Approval of Road Vehicles by Design Type
 
Sec. 115.64  Plan review.

    (a) A manufacturer or owner who wants road vehicles to be approved 
by design type must submit the plans and specifications of the road 
vehicles to the Certifying Authority.
    (b) The Certifying Authority that examines the plans and 
specifications submitted in accordance with paragraph (a) of this 
section shall:
    (1) Approve the plans and specifications in accordance with the 
requirements of Sec. 115.65 and arrange to inspect a road vehicle in 
accordance with Sec. 115.66; or
    (2) Advise the applicant of any necessary changes to be made for 
compliance with the requirements of Sec. 115.65.
    (c) If changes in design of the road vehicle are made during 
production but after approval of the plans and specifications by the 
Certifying Authority, the manufacturer shall immediately notify the 
Certifying Authority and furnish it with ``as-built'' drawings of the 
road vehicle so that the plans can be reviewed and one or more road 
vehicles inspected during the production stage to confirm that they 
continue to comply with the requirements of Sec. 115.65.