[Code of Federal Regulations]
[Title 19, Volume 1]
[Revised as of April 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 19CFR19.14]

[Page 316-317]
 
                        TITLE 19--CUSTOMS DUTIES
 
  CHAPTER I--UNITED STATES CUSTOMS SERVICE, DEPARTMENT OF THE TREASURY
 
PART 19--CUSTOMS WAREHOUSES, CONTAINER STATIONS AND CONTROL OF MERCHANDISE THEREIN--Table of Contents
 
Sec. 19.14  Materials for use in manufacturing warehouse.

    (a) Imported merchandise to be used in a bonded manufacturing 
warehouse shall be entered on Customs Form 7501 at the port at which 
such warehouse is located. Such form shall be prepared in 5 copies and 
shall contain all of the statistical information as provided in 
Sec. 141.61(e) of this chapter. If the merchandise has been imported or 
entered for warehouse at another port, it may be forwarded to the port 
at which the manufacturing warehouse is located under an immediate 
transportation without appraisement entry or warehouse withdrawal for 
transportation, whichever is applicable.
    (b) Bond required. Before the transfer of the merchandise to the 
manufacturing warehouse is permitted, a bond on Customs Form 301, 
containing the bond conditions set forth in Sec. 113.62 of this chapter 
shall be required.
    (c) Domestic merchandise. When the proprietor of any bonded 
manufacturing warehouse desires to receive therein any domestic 
merchandise, except merchandise subject to internal-revenue tax, to be 
used in connection with the manufacturer of articles permitted to be 
manufactured in such warehouse, including packages, coverings, vessels, 
and labels used in putting up such articles, an application in the 
following form shall be sent to the port director for approval and after 
approval retained by the warehouse proprietor:

                  Application To Receive Free Materials

Port of_________________________________________________________________
--------, 19----.
    To the Port Director:
    Application is hereby made to receive into the bonded manufacturing 
warehouse known as ----------------, situated at ---------------- the 
following described articles and materials:

----------------------------------------------------------------------------------------------------------------
              Marks                      Nos.             Description          Quantity              Value
----------------------------------------------------------------------------------------------------------------
                                  ..................  ..................  ..................  ..................
                                  ..................  ..................  ..................  ..................
                                  ..................  ..................  ..................  ..................
----------------------------------------------------------------------------------------------------------------

(Signature)_____________________________________________________________
Port____________________________________________________________________
--------, 19----.


To the warehouse proprietor in charge of the bonded manufacturing 
warehouse specified above:

    The above described articles and materials are hereby permitted to 
be received into the warehouse in your charge, to be used therein in 
connection with the manufacture of articles as authorized by law.
Port Director___________________________________________________________

    (d) Domestic spirits and wines. For the transfer of domestic spirits 
from the bonded premises of a distilled spirits plant to a bonded 
manufacturing warehouse, or for the transfer of domestic wines from a 
bonded wine cellar to a bonded manufacturing warehouse, a bond on 
Customs Form 301, containing the bond conditions set forth in 
Sec. 113.62 of this chapter, shall be required.
    (e) Monthly statement. At the end of each month, the proprietor 
shall file with the port director a statement of

[[Page 317]]

all imported merchandise on which Internal Revenue tax has not been paid 
which was used by the proprietor in the manufacture of articles. The 
statement shall report this information for each warehouse entry 
represented in the manufacturing process.

[28 FR 14763, Dec. 31, 1963, as amended by T.D. 73-312, 38 FR 30882, 
Nov. 8, 1973; T.D. 82-204, 47 FR 49373, Nov. 1, 1982; T.D. 84-129, 49 FR 
23166, June 5, 1984; T.D. 84-213, 49 FR 41169, Oct. 19, 1984; T.D. 85-
123, 50 FR 29953, July 23, 1985]