[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR146.20]

[Page 156]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 146--OPERATIONS--Table of Contents
 
                        Subpart A--OCS Facilities
 
Sec. 146.20  Work vests.

    (a) Types of approved work vests. Each buoyant work vest carried 
under the permissive authority of this section must be approved under--
    (1) 46 CFR 160.053; or
    (2) 46 CFR 160.077 as a commercial hybrid PFD.
    (b) Use. Approved buoyant work vests are considered to be items of 
safety apparel and may be carried aboard OCS facilities to be worn by 
persons employed thereon when working near or over the water. The use 
and control of such vests shall be under the supervision of the person 
in charge of the facility. When carried, such vests shall not be 
accepted in lieu of any portion of the required number of approved life 
preservers and shall not be substituted for the approved life preservers 
required to be worn during drills and emergencies.
    (c) Stowage. The work vests shall be stowed separately from the 
regular stowage of approved life preservers. The location for the 
stowage of work vests shall be such as not to be easily confused with 
that for approved life preservers.
    (d) Inspections. Each work vest shall be subject to examination by a 
marine inspector to determine its serviceability. If found to be 
satisfactory, it may be continued in service, but shall not be stamped 
by a marine inspector with a Coast Guard stamp. If a work vest is found 
not to be in a serviceable condition, then such work vest shall be 
removed from the OCS facility. If a work vest is beyond repair, it shall 
be destroyed or mutilated in the presence of a marine inspector so as to 
prevent its continued use as a work vest.
    (e) Additional requirements for hybrid work vests. Commercial hybrid 
PFD's must, in addition to the other requirements in this section, be--
    (1) Used, stowed, and maintained in accordance with--
    (i) The procedures set out in the manual required for these devices 
by 46 CFR 160.077-29; and
    (ii) Any limitation(s) marked on them; and
    (2) Of the same or similar design and have the same method of 
operation as each other hybrid PFD carried on board.

[CGD 78-160, 47 FR 9383, Mar. 4, 1982, as amended by CGD 78-174A, 51 FR 
4339, Feb. 4, 1986]