[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR154.106]

[Page 299-300]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 154--FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK--Table 
of Contents
 
                           Subpart A--General
 
Sec. 154.106  Incorporation by reference.

    (a) Certain material is incorporated by reference into this part 
with the approval of the Director of the Federal Register in accordance 
with 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other 
than that specified in paragraph (b) of this section, the Coast Guard 
must publish notice of change in the Federal Register and make the 
material available to the public. All approved material is on file at 
the Office of the Federal Register, 800 North Capitol Street NW., suite 
700, Washington, DC and at the U.S. Coast Guard, Office of the 
Compliance (G-MOC), Room 1116, 2100 Second Street SW., Washington, DC 
20593-0001, and is available from the sources indicated in paragraph (b) 
of this section.

[[Page 300]]

    (b) The material approved for incorporation by reference in this 
part and the sections affected are:

                   American Petroleum Institute (API)

2101 L Street NW., Washington, DC 20037
API Standard 2000, Venting Atmospheric and Low-Pressure Storage Tanks 
(Nonrefrigerated and Refrigerated), Third Edition, January 1982 
(reaffirmed December 1987).......................................154.814
API Recommended Practice 550, Manual on Installation of Refinery 
Instruments and Control Systems, Part II--Process Stream Analyzers, 
Section 1--Oxygen Analyzers, Fourth Edition, February 1985.......154.824

              American National Standards Institute (ANSI)

11 West 42nd Street, New York, NY 10036
ANSI B16.5, Steel Pipe Flanges and Flanged Fittings, 1988.......154.500; 
                                                        154.808; 154.810
ANSI B16.24, Bronze Pipe Flanges and Flange Fittings Class 150 and 300, 
1979....................................................154.500; 154.808
ANSI B31.3, Chemical Plant and Petroleum Refinery Piping, 1987 
(including B31.3a-1988, B31.3b-1988, and B31.3c-1989 addenda)...154.510; 
                                                                 154.808

            American Society for Testing and Materials (ASTM)

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM F 631-93, Standard Guide for Collecting Skimmer Performance Data in 
Controlled Environments.......................................Appendix C
ASTM F 715-95, Standard Test Methods for Coated Fabrics Used for Oil 
Spill Control and Storage.....................................Appendix C
ASTM F 722-82 (1993), Standard Specification for Welded Joints for 
Shipboard Piping Systems..........................Appendix A; Appendix B
ASTM F 1122-87 (1992), Standard Specification for Quick Disconnect 
Couplings........................................................154.500
ASTM F 1155-98, Standard Practice for Selection and Application of 
Piping System Materials...........................Appendix A; Appendix B

             International Electrotechnical Commission (IEC)

Bureau Central de la Commission Electrotechnique Internationale, 1 rue 
          de Varembe, Geneva, Switzerland
IEC 309-1--Plugs, Socket-Outlets and Couplers for Industrial Purposes: 
Part 1, General Requirements, 1979...............................154.812
IEC 309-2--Plugs, Socket-Outlets and Couplers for Industrial Purposes; 
Part 2, Dimensional Interchangeability Requirements for Pin and Contact-
tube Accessories, 1981...........................................154.812

          National Electrical Manufacturers Association (NEMA)

2101 L Street NW., Washington, DC 20036
ANSI NEMA WD-6--Wiring Devices, Dimensional Requirements, 1988...154.812

               National Fire Protection Association (NFPA)

1 Batterymarch Park, Quincy, MA 02269-9101
NFPA 51B, Standard for Fire Prevention in Use of Cutting and Welding 
Processes, 1994..................................................154.735

            Oil Companies International Marine Forum (OCIMF)

96 Victoria Street, 15th Floor, London SW1E 5JW, England
International Safety Guide for Oil Tankers and Terminals, Section 6.10, 
Fourth Ed., 1996.................................................154.810
International Safety Guide for Oil Tankers and Terminals, Sections 9.1, 
9.2, 9.3 and 9.5, Fourth Ed., 1996...............................154.735

[CGD 88-032, 56 FR 35819, July 29, 1991, as amended by CGD 91-036, 58 FR 
7352, Feb. 5, 1993; CGD 96-026, 61 FR 33665, June 28, 1996; CGD 93-056, 
61 FR 41458, Aug. 8, 1996; 61 FR 42462, Aug. 15, 1996; USCG-1999-5151, 
64 FR 67175, Dec. 1, 1999]