[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR159.55]

[Page 525]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 159--MARINE SANITATION DEVICES--Table of Contents
 
              Subpart C--Design, Construction, and Testing
 
Sec. 159.55  Identification.

    (a) Each production device must be legibly marked in accordance with 
paragraph (b) of this section with the following information:
    (1) The name of the manufacturer.
    (2) The name and model number of the device.
    (3) The month and year of completion of manufacture.
    (4) Serial number.
    (5) Whether the device is certified for use on an inspected or an 
uninspected vessel.
    (6) Whether the device is Type I, II, or III.
    (b) The information required by paragraph (a) of this section must 
appear on a nameplate attached to the device or in lettering on the 
device. The nameplate or lettering stamped on the device must be capable 
of withstanding without loss of legibility the combined effects of 
normal wear and tear and exposure to water, salt spray, direct sunlight, 
heat, cold, and any substance listed in Sec. 159.117(b) and (c). The 
nameplate and lettering must be designed to resist efforts to remove 
them from the device or efforts to alter the information stamped on the 
nameplate or the device without leaving some obvious evidence of the 
attempted removal or alteration.

[CGD 73-83, 40 FR 4624, Jan. 30, 1975, as amended by CGD 75-213, 41 FR 
15325, Apr. 12, 1976]