[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR181.15]

[Page 824-825]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 181--MANUFACTURER REQUIREMENTS--Table of Contents
 
           Subpart B--Manufacturer Certification of Compliance
 
Sec. 181.15  Contents of labels.

    (a) Each label required by Sec. 181.7 must contain:
    (1) The name and address of the manufacturer or private label 
merchandiser who certifies that the boat or item of associated equipment 
complies with the standards prescribed in Part 183 of this subchapter; 
and
    (2) Except as provided in paragraph (c) of this section, the words:

[[Page 825]]

    (i) ``This (insert `Boat' or `Equipment') Complies With U.S. Coast 
Guard Safety Standards In Effect On (insert date of certification as 
prescribed in paragraph (b) of this section)''; or
    (ii) If the item being certified is a boat, the label may show the 
words, ``This Boat Complies With U.S. Coast Guard Safety Standards In 
Effect On The Date of Certification.''
    (b) Date of certification must be no earlier than the date on which 
construction or assembly began and no later than the date on which the 
boat or item of associated equipment leaves the place of manufacture or 
assembly or import for the purposes of sale.
    (c) [Reserved]
    (d) Except as provided in paragraph (e) of this section, the 
manufacturer may, in addition to the information required by paragraphs 
(a) and (b) of this section, display on the certification label any or 
all of the following information:
    (1) Model name or designation.
    (2) Hull identification number (if a boat) or serial number (if an 
item of associated equipment).
    (3) Model year.
    (e) Display of the hull identification number on the certification 
label does not satisfy the display requirements of Sec. 181.29.
    (f) Each boat which displays a maximum horsepower capacity 
determined in accordance with Sec. 183.53(b) must, in addition to the 
information required by paragraphs (a), (b) and (d) of this section, 
display on the certification label, the following statement in letters 
no less than one-quarter of an inch in height:
    THIS BOAT IS INTENDED FOR RACING AND OTHER HIGH PERFORMANCE 
ACTIVITIES. THE SKILL REQUIRED MAY EXCEED THE ABILITIES OF SOME 
OPERATORS.

[CGD 72-60, 37 FR 15779, Aug. 4, 1972, as amended by CGD 83-012, 49 FR 
39327, Oct. 5, 1984; CGD 85-002, 51 FR 37573, Oct. 23, 1986; USCG-1999-
5832, 64 FR 34716, June 29, 1999]