[Code of Federal Regulations] [Title 37, Volume 1] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 37CFR1.58] [Page 57] TITLE 37--PATENTS, TRADEMARKS, AND COPYRIGHTS CHAPTER I--UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE PART 1--RULES OF PRACTICE IN PATENT CASES--Table of Contents Subpart B--National Processing Provisions Sec. 1.58 Chemical and mathematical formulae and tables. (a) The specification, including the claims, may contain chemical and mathematical formulas, but shall not contain drawings or flow diagrams. The description portion of the specification may contain tables; claims may contain tables either if necessary to conform to 35 U.S.C. 112 or if otherwise found to be desirable. (b) Tables that are submitted in electronic form (Sec.Sec. 1.96(c) and 1.821(c)) must maintain the spatial relationships (e.g., columns and rows) of the table elements and preserve the information they convey. Chemical and mathematical formulae must be encoded to maintain the proper positioning of their characters when displayed in order to preserve their intended meaning. (c) Chemical and mathematical formulae and tables must be presented in compliance with Sec. 1.52 (a) and (b), except that chemical and mathematical formulae or tables may be placed in a landscape orientation if they cannot be presented satisfactorily in a portrait orientation. Typewritten characters used in such formulae and tables must be chosen from a block (nonscript) type font or lettering style having capital letters which are at least 0.21 cm. (0.08 inch) high (e.g., elite type). A space at least 0.64 cm. (\1/4\ inch) high should be provided between complex formulae and tables and the text. Tables should have the lines and columns of data closely spaced to conserve space, consistent with a high degree of legibility. (Pub. L. 94-131, 89 Stat. 685) [43 FR 20463, May 11, 1978, as amended at 61 FR 42803, Aug. 19, 1996; 65 FR 54667, Sept. 8, 2000]