[Code of Federal Regulations]
[Title 40, Volume 22]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR211.104]

[Page 170]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 211--PRODUCT NOISE LABELING--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 211.104  Label content.

    The following data and information must be on the label of all 
products for which regulations have been published under this part:
    (a) The term ``Noise Rating'' if the product produces noise, or the 
term ``Noise Reduction Rating'' if the product reduces noise;
    (b) The acoustic rating descriptor that is determined according to 
procedures specified in the regulations that will be published under 
this part;
    (c) Comparative acoustic rating information, which EPA will specify 
in the regulations published under this part;
    (d) A product manufacturer identification consisting of: (1) The 
Company name, and (2) The City and State of the principal office;
    (e) A product model number or type identification;
    (f) The phrase ``Federal law prohibits removal of this label prior 
to purchase'';
    (g) The U.S. Environmental Protection Agency logo, as shown in 
Figure 1;
    (h) The phrase ``Label Required by U.S. EPA regulation 40 CFR part 
211, subpart ------.''
[GRAPHIC] [TIFF OMITTED] TC01FE92.055