[Code of Federal Regulations]
[Title 40, Volume 22]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR211.105]

[Page 170-171]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 211--PRODUCT NOISE LABELING--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 211.105  Label format.

    (a) Unless specified otherwise in other regulations published under 
this part, the format of the label must be as shown in Figure 2. The 
label must include all data and information required under Sec. 211.104.

[[Page 171]]

[GRAPHIC] [TIFF OMITTED] TC01FE92.056

    (b) Unless EPA specifies otherwise in regulations published under 
this part, the required data and information specified in Sec. 211.104 
(a) through (h) must be located in the following areas of the prescribed 
label (see Figure 2 of this section):
    (1) Section 211.104 (a)--Area A.
    (2) Section 211.104 (b)--Area B.
    (3) Section 211.104 (c)--Area C.
    (4) Section 211.104 (d)--Area D.
    (5) Section 211.104 (e)--Area E.
    (6) Section 211.104 (f)--Area F.
    (7) Section 211.104 (g)--Area G.
    (8) Section 211.104 (h)--Area H.