[Code of Federal Regulations]
[Title 40, Volume 22]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR211.212-8]

[Page 185]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 211--PRODUCT NOISE LABELING--Table of Contents
 
                  Subpart B--Hearing Protective Devices
 
Sec. 211.212-8  Relabeling requirements.

    (a) Any manufacturer who is found to not conform with Sec. 211.212-
6, and who has met the requirement of Sec. 211.212-7, must relabel all 
protectors of the specified category already in his possession according 
to Sec. 211.211 before distributing them in commerce. The manufacturer 
shall relabel at values no greater than any mean attenuation values 
received from Compliance Audit Testing. Any manufacturer who proceeds 
with Sec. 211.212-7(a) or (b) must relabel his product line with the 
lowest mean attenuation value at each octave band received from testing; 
or he may take into account product variability under Sec. 211.211(b) 
and label with a lower mean attenuation value than the worst case values 
obtained from Compliance Audit Testing.
    (b) [Reserved]

(Sec. 10(a)(3), Pub. L. 92-574, 86 Stat. 1242 (42 U.S.C. 4909(a)(3)))