[Code of Federal Regulations]
[Title 40, Volume 24]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR270.27]

[Page 301-302]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
                           AGENCY (CONTINUED)
 
PART 270--EPA ADMINISTERED PERMIT PROGRAMS: THE HAZARDOUS WASTE PERMIT PROGRAM--Table of Contents
 
                      Subpart B--Permit Application
 
Sec. 270.27  Specific Part B information requirements for air emission controls for tanks, surface impoundments, and containers.

    (a) Except as otherwise provided in 40 CFR 264.1, owners and 
operators of tanks, surface impoundments, or containers that use air 
emission controls in accordance with the requirements of 40 CFR part 
264, subpart CC shall provide the following additional information:
    (1) Documentation for each floating roof cover installed on a tank 
subject to 40 CFR 264.1084(d)(1) or 40 CFR 264.1084(d)(2) that includes 
information prepared by the owner or operator or provided by the cover 
manufacturer or vendor describing the cover design, and certification by 
the owner or operator that the cover meets the applicable design 
specifications as listed in 40 CFR 264.1084(e)(1) or 40 CFR 
264.1084(f)(1).
    (2) Identification of each container area subject to the 
requirements of 40 CFR part 264, subpart CC and certification by the 
owner or operator that the requirements of this subpart are met.
    (3) Documentation for each enclosure used to control air pollutant 
emissions from tanks or containers in accordance with the requirements 
of 40 CFR 264.1084(d)(5) or 40 CFR 264.1086(e)(1)(ii)

[[Page 302]]

that includes records for the most recent set of calculations and 
measurements performed by the owner or operator to verify that the 
enclosure meets the criteria of a permanent total enclosure as specified 
in ``Procedure T--Criteria for and Verification of a Permanent or 
Temporary Total Enclosure'' under 40 CFR 52.741, appendix B.
    (4) Documentation for each floating membrane cover installed on a 
surface impoundment in accordance with the requirements of 40 CFR 
264.1085(c) that includes information prepared by the owner or operator 
or provided by the cover manufacturer or vendor describing the cover 
design, and certification by the owner or operator that the cover meets 
the specifications listed in 40 CFR 264.1085(c)(1).
    (5) Documentation for each closed-vent system and control device 
installed in accordance with the requirements of 40 CFR 264.1087 that 
includes design and performance information as specified in Sec. 270.24 
(c) and (d) of this part.
    (6) An emission monitoring plan for both Method 21 in 40 CFR part 
60, appendix A and control device monitoring methods. This plan shall 
include the following information: monitoring point(s), monitoring 
methods for control devices, monitoring frequency, procedures for 
documenting exceedances, and procedures for mitigating noncompliances.
    (7) When an owner or operator of a facility subject to 40 CFR part 
265, subpart CC cannot comply with 40 CFR part 264, subpart CC by the 
date of permit issuance, the schedule of implementation required under 
40 CFR 265.1082.

[61 FR 59996, Nov. 25, 1996]