[Code of Federal Regulations] [Title 40, Volume 26] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR406.22] [Page 80] TITLE 40-PROTECTION OF ENVIRONMENT CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 406-GRAIN MILLS POINT SOURCE CATEGORY--Table of Contents Subpart B-Corn Dry Milling Subcategory Sec. 406.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Sec.Sec. 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): ------------------------------------------------------------------------ Effluent limitations ----------------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days shall day not exceed- ------------------------------------------------------------------------ Metric units (kilograms per 1,000 kg of corn) ------------- BOD5................................ 0.21 0.07 TSS................................. 0.18 .06 pH.................................. (\1\) (\1\) ------------- English units (pounds per 1,000 stdbu of corn) ------------- BOD5................................ 12.0 4.0 TSS................................. 10.5 3.5 pH.................................. (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0. [39 FR 10513, Mar. 20, 1974, as amended at 60 FR 33936, June 29, 1995]