[Code of Federal Regulations]
[Title 40, Volume 26]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR411.13]

[Page 192]
 
                TITLE 40-PROTECTION OF ENVIRONMENT
 
      CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 411-CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents
 
                Subpart A-Nonleaching Subcategory
 
Sec. 411.13  Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology 
          economically achievable.

    The following limitations establish the quantity or quality of 
pollutants or pollutant properties, controlled by this section, which 
may be discharged by a point source subject to the provisions of this 
subpart after application of the best available technology economically 
achievable.

------------------------------------------------------------------------
                                          Effluent limitations (maximum
        Effluent characteristic                  for any 1 day)
------------------------------------------------------------------------
Temperature (heat)....................  Not to exceed 3 [deg]C
                                         rise above inlet temperature.
------------------------------------------------------------------------


[44 FR 50741, Aug. 29, 1979]