Section

[Code of Federal Regulations]
[Title 40, Volume 26]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR411.22]

[Page 193]

TITLE 40-PROTECTION OF ENVIRONMENT

CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

PART 411-CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents

Subpart B-Leaching Subcategory

Sec. 411.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control
technology currently available.

Except as provided in Sec.Sec. 125.30 through
125.32, any existing point source subject to this subpart shall achieve
the following effluent limitations representing the degree of effluent
reduction attainable by the application of the best practicable control
technology currently available (BPT):

------------------------------------------------------------------------
Effluent limitations (maximum
Effluent characteristic for any 1 day)
------------------------------------------------------------------------
Metric units (kg/kkg of dust
leached)

---------------------------------
TSS................................... 0.4.
Temperature (heat).................... Not to exceed 3 [deg]C
rise above inlet temperature.
pH.................................... Within the range 6.0 to 9.0.

---------------------------------
English units (lb/1,000 lb of
dust leached)

[39 FR 6591, Feb. 20, 1974, as amended at 60 FR 33951, June 29, 1995]