[Code of Federal Regulations]
[Title 40, Volume 26]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR411.25]

[Page 194]
 
                TITLE 40-PROTECTION OF ENVIRONMENT
 
      CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 411-CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents
 
                  Subpart B-Leaching Subcategory
 
Sec. 411.25  Standards of performance for new sources.

    The following standards of performance establish the quantity or 
quality of pollutants or pollutant properties, controlled by this 
section, which may be discharged by a new source subject to the 
provisions of this subpart:

------------------------------------------------------------------------
                                          Effluent limitations (maximum
        Effluent characteristic                  for any 1 day)
------------------------------------------------------------------------
                                          Metric units (kg/kkg of dust
                                                     leached)

                                       ---------------------------------
TSS...................................  0.4.
Temperature (heat)....................  Not to exceed 3 [deg]C
                                         rise above inlet temperature.
pH....................................  Within the range 6.0 to 9.0.

                                       ---------------------------------
                                          English units (lb/1,000 lb of
                                                  dust leached)

                                       ---------------------------------
TSS...................................  0.4.
Temperature (heat)....................  Not to exceed 3 [deg]C
                                         rise above inlet temperature.
pH....................................  Within the range 6.0 to 9.0.
------------------------------------------------------------------------