[Code of Federal Regulations] [Title 40, Volume 26] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR419.16] [Page 360-361] TITLE 40-PROTECTION OF ENVIRONMENT CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 419-PETROLEUM REFINING POINT SOURCE CATEGORY--Table of Contents Subpart A-Topping Subcategory Sec. 419.16 Standards of performance for new sources (NSPS). (a) Any new source subject to this subpart must achieve the following new source performance standards (NSPS): ------------------------------------------------------------------------ NSPS effluent limitations ------------------------ Average of daily Pollutant or pollutant property Maximum values for for any 1 30 day consecutive days shall not exceed ------------------------------------------------------------------------ Metric units (kilograms per cubic meter of flow) ------------- BOD5........................................... 11.8 6.3 TSS............................................ 8.3 4.9 COD \1\........................................ 61.0 32 Oil and grease................................. 3.6 1.9 Phenolic compounds............................. 0.088 0.043 Ammonia as N................................... 2.8 1.3 Sulfide........................................ 0.078 0.035 Total chromium................................. 0.18 0.105 Hexavalent chromium............................ 0.015 0.0068 pH............................................. (\2\) (\2\) ------------- English units (pounds per 1,000 gal of flow) ------------- BOD5........................................... 4.2 2.2 TSS............................................ 3.0 1.9 COD \1\........................................ 21.7 11.2 Oil and grease................................. 1.3 0.70 Phenolic compounds............................. 0.031 0.016 Ammonia as N................................... 1.0 0.45 Sulfide........................................ 0.027 0.012 Total chromium................................. 0.064 0.037 Hexavalent chromium............................ 0.0052 0.0025 pH............................................. (\2\) (\2\) ------------------------------------------------------------------------ \1\ See footnote following table in Sec. 419.13(d). \2\ Within the range of 6.0 to 9.0 (b) The limits set forth in paragraph (a) of this section are to be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily values for thirty consecutive days. (1) Size factor. ------------------------------------------------------------------------ Size 1,000 bbl of feedstock per stream day factor ------------------------------------------------------------------------ Less than 24.9.............................................. 1.02 25.0 to 49.9................................................ 1.06 [[Page 361]] 50.0 to 74.9................................................ 1.16 75.0 to 99.9................................................ 1.26 100 to 124.9................................................ 1.38 125.0 to 149.9.............................................. 1.50 150.0 or greater............................................ 1.57 ------------------------------------------------------------------------ (2) Process factor. ------------------------------------------------------------------------ Process Process configuration factor ------------------------------------------------------------------------ Less than 2.49.............................................. 0.62 2.5 to 3.49................................................. 0.67 3.5 to 4.49................................................. 0.80 4.5 to 5.49................................................. 0.95 5.5 to 5.99................................................. 1.07 6.0 to 6.49................................................. 1.17 6.5 to 6.99................................................. 1.27 7.0 to 7.49................................................. 1.39 7.5 to 7.99................................................. 1.51 8.0 to 8.49................................................. 1.64 8.5 to 9.99................................................. 1.79 9.0 to 9.49................................................. 1.95 9.5 to 9.99................................................. 2.12 10.0 to 10.49............................................... 2.31 10.5 to 10.99............................................... 2.51 11.0 to 11.49............................................... 2.73 11.5 to 11.99............................................... 2.98 12.0 to 12.49............................................... 3.24 12.5 to 12.99............................................... 3.53 13.0 to 13.49............................................... 3.84 13.5 to 13.99............................................... 4.18 14.0 or greater............................................. 4.36 ------------------------------------------------------------------------ (3) See the comprehensive example in subpart D, Sec. 419.42(b)(3). (c) The following allocations constitute the quantity and quality of pollutants or pollutant properties controlled by this paragraph and attributable to ballast, which may be discharged after the application of best practicable control technology currently available, by a point source subject to this subpart, in addition to the discharge allowed by paragraph (b) of this section. The allocation allowed for ballast water flow, as kg/cu m (lb/Mgal), shall be based on those ballast waters treated at the refinery. ------------------------------------------------------------------------ NSPS Effluent Limitations for Ballast Water ------------------------ Average of Pollutant or pollutant property daily Maximum values for for any 1 30 day consecutive days shall not exceed ------------------------------------------------------------------------ Metric units (kilograms per cubic meter of flow) ------------- BOD5........................................... 0.048 0.026 TSS............................................ 0.033 0.021 COD \1\........................................ 0.47 0.24 Oil and grease................................. 0.015 0.008 pH............................................. (\2\) (\2\) ------------- English units (pounds per 1,000 gal of flow) ------------- BOD5........................................... 0.40 0.21 TSS............................................ 0.27 0.17 COD \1\........................................ 3.9 2.0 Oil and grease................................. 0.126 0.067 pH............................................. (\2\) (\2\) ------------------------------------------------------------------------ \1\ See footnote following table in Sec. 419.13(d). \2\ Within the range of 6.0 to 9.0 (d) The quantity and quality of pollutants or pollutant properties controlled by this paragraph, attributable to once-through cooling water, are excluded from the discharge allowed by paragraph (b) of this section. Once-through cooling water may be discharged with a total organic carbon concentration not to exceed 5 mg/l. (e) Effluent limitations for runoff. [Reserved] [47 FR 46446, Oct. 18, 1982, as amended at 50 FR 28523, July 12, 1985; 50 FR 32414, Aug. 12, 1985]