[Code of Federal Regulations] [Title 40, Volume 26] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR420.36] [Page 404] TITLE 40-PROTECTION OF ENVIRONMENT CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 420-IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart C-Ironmaking Subcategory Sec. 420.36 Pretreatment standards for new sources (PSNS). Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. (a) Iron blast furnace. Subpart C ------------------------------------------------------------------------ Pretreatment standards for new sources --------------------------- Average of Pollutant or pollutant property daily values Maximum for for 30 any 1 day consecutive days ------------------------------------------------------------------------ Kg/kkg (pounds per 1,000 lb) of product --------------- Ammonia-N\1\................................ 0.00876 0.00292 Cyanide..................................... 0.000584 0.000292 Phenols (4AAP).............................. 0.0000584 0.0000292 Lead........................................ 0.000263 0.0000876 Zinc........................................ 0.000394 0.000131 ------------------------------------------------------------------------ \1\ The pretreatment standards for ammonia are not applicable to sources that discharge to a POTW with nitrification capability (defined at Sec. 420.02 (s)). (b) [Reserved] [47 FR 23284, May 27, 1982, as amended at 49 FR 21030, May 17, 1984; 67 FR 64267, Oct. 17, 2002] [[Page 405]]