[Code of Federal Regulations]
[Title 40, Volume 26]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR424.25]

[Page 666]
 
                TITLE 40-PROTECTION OF ENVIRONMENT
 
      CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 424-FERROALLOY MANUFACTURING POINT SOURCE CATEGORY--Table of Contents
 
Subpart B-Covered Electric Furnaces and Other Smelting Operations 
           With Wet Air Pollution Control Devices Subcategory
 
Sec. 424.25  Standards of performance for new sources.

    The following standards of performance establish the quantity or 
quality of pollutants or pollutant properties, controlled by this 
section, which may be discharged by a new source subject to the 
provisions of this subpart:

------------------------------------------------------------------------
                                             Effluent limitations
                                     -----------------------------------
                                                     Average of daily
       Effluent characteristic          Maximum        values for 30
                                       for any 1  consecutive days shall
                                          day       not exceed-
                                                         
------------------------------------------------------------------------
                                             Metric units (kg/Mwh)

                                     -------------
TSS.................................       0.032                0.016
Chromium total......................        .001                .0005
Chromium VI.........................       .0001               .00005
Manganese total.....................        .011                 .005
Cyanide total.......................       .0005                .0003
Phenols.............................       .0004                .0002
pH..................................       (\1\)                (\1\)

                                     -------------
                                            English units (lb/Mwh)

                                     -------------
TSS.................................        .071                 .035
Chromium total......................        .002                .0012
Chromium VI.........................       .0002                .0001
Manganese total.....................        .023                 .012
Cyanide total.......................        .001                .0006
Phenols.............................       .0009                .0005
pH..................................       (\1\)                (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.


Provided, however, That for nonelectric furnace smelting processes, the 
units of effluent limitations set forth in this section shall be read as 
``kg/kkg of product'' rather than 
``kg/Mwh,'' and the limitations (except for 
pH) shall be 3.3 times those listed in the table in this section (or, 
for English units, ``lb/ton of product'' 
rather than ``lb/Mwh,'' and the limitations 
(except for pH) shall be three times those listed in the table).

[39 FR 6809, Feb. 22, 1974, as amended at 39 FR 17841, May 21, 1974]