[Code of Federal Regulations]
[Title 40, Volume 26]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR424.35]

[Page 667-668]
 
                TITLE 40-PROTECTION OF ENVIRONMENT
 
      CHAPTER I-ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 424-FERROALLOY MANUFACTURING POINT SOURCE CATEGORY--Table of Contents
 
              Subpart C-Slag Processing Subcategory
 
Sec. 424.35  Standards of performance for new sources.

    The following standards of performance establish the quantity or 
quality of pollutants or pollutant properties,

[[Page 668]]

controlled by this section, which may be discharged by a new source 
subject to the provisions of this subpart:

------------------------------------------------------------------------
                                             Effluent limitations
                                     -----------------------------------
                                                     Average of daily
       Effluent characteristic          Maximum        values for 30
                                       for any 1  consecutive days shall
                                          day       not exceed-
                                                         
------------------------------------------------------------------------
                                        Metric units (kg/kkg processed)

                                     -------------
TSS.................................       0.271                0.136
Chromium total......................       .0054                .0027
Manganese total.....................       0.054                 .027
pH..................................       (\1\)                (\1\)

                                     -------------
                                       English units (lb/ton processed)

                                     -------------
TSS.................................        .542                 .271
Chromium total......................        .011                .0054
Manganese total.....................        .108                 .054
pH..................................       (\1\)                (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.