Section

[Code of Federal Regulations]
[Title 40, Volume 27]
[Revised as ofJuly 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR428.82]

[Page 77]

TITLE 40--PROTECTION OF ENVIRONMENT

CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

PART 428--RUBBER MANUFACTURING POINT SOURCE CATEGORY--Table of Contents

Subpart H--Wet Digestion Reclaimed Rubber Subcategory

Sec. 428.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control
technology currently available.

Except as provided in Secs. 125.30 through 125.32, any existing
point source subject to this subpart shall achieve the following
effluent limitations representing the degree of effluent reduction
attainable by the application of the best practicable control technology
currently available (BPT):

------------------------------------------------------------------------
Effluent limitations
-----------------------------
Average of daily
Effluent characteristic Maximum values for 30
for any 1 consecutive days
day shall not exceed-
-
------------------------------------------------------------------------
Metric units (kg/kkg of
product)

-------------
English units (lb/1,000 lb
of product)

-------------
COD....................................... 14.7 6.11
Oil and grease............................ 0.40 0.144
TSS....................................... 1.04 0.52
pH........................................ (\1\) (\1\)
------------------------------------------------------------------------
\1\ Within the range 6.0 to 9.0.

[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33963, June 29, 1995]