[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR461.11] [Page 515-517] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 461--BATTERY MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart A--Cadmium Subcategory Sec. 461.11 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). (a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available: (1) Subpart A--Pasted and Pressed Powder Anodes. [[Page 516]] BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cadmium English units--pounds per 1,000,000 pounds of cadmium ------------------------- Cadmium....................................... 0.92 0.41 Nickel........................................ 5.18 3.43 Zinc.......................................... 3.94 1.65 Cobalt........................................ 0.57 0.24 Oil and grease................................ 54.00 32.40 TSS........................................... 111.00 52.65 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (2) Subpart A--Electrodeposited Anodes. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cadmium English units--pounds per 1,000,000 pounds of cadmium -------------- Cadmium....................................... 237.0 104.6 Nickel........................................ 1,338.2 885.2 Zinc.......................................... 1,017.6 425.2 Cobalt........................................ 146.4 62.7 Oil and grease................................ 13,940.0 8,364.0 TSS........................................... 28,577.0 13,592.0 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (3) Subpart A--Impregnated Anodes. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cadmium English units--pounds per 1,000,000 pounds of cadmium -------------- Cadmium....................................... 339.3 149.7 Nickel........................................ 1,916.2 1,267.5 Zinc.......................................... 1,457.1 608.8 Cobalt........................................ 209.6 89.8 Oil and grease................................ 19,960.0 11,976.0 TSS........................................... 40,918.0 19,461.0 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (4) Subpart A--Nickel Electrodeposited Cathodes. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of nickel applied English units--pounds per 1,000,000 pounds of nickel applied -------------- Cadmium....................................... 193.5 85.4 Nickel........................................ 1,092.5 722.6 Zinc.......................................... 830.7 347.1 Cobalt........................................ 119.5 51.2 Oil and grease................................ 11,380.0 6,828.0 TSS........................................... 23,329.0 11,095.5 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (5) Subpart A--Nickel Impregnated Cathodes. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of nickel applied English units--pounds per 1,000,000 pounds of nickel applied -------------- Cadmium....................................... 557.6 246.0 Nickel........................................ 3,148.8 2,082.8 Zinc.......................................... 2,394.4 1,000.4 Cobalt........................................ 344.4 147.6 Oil and grease................................ 32,800.0 19,680.0 TSS........................................... 67,240.0 31,980.0 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (6) Subpart A--Miscellaneous Wastewater Streams. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cells produced English units--pounds per 1,000,000 pounds of cells produced -------------- Cadmium....................................... 6.29 2.77 Nickel........................................ 35.54 23.50 Zinc.......................................... 27.02 11.29 Cobalt........................................ 3.89 1.66 Oil and grease................................ 370.20 222.12 TSS........................................... 758.91 360.94 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (7) Subpart A--Cadmium Powder Production. [[Page 517]] BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cadmium powder produced English units--pounds per 1,000,000 pounds of cadmium powder produced -------------- Cadmium....................................... 22.34 9.86 Nickel........................................ 126.14 83.44 Zinc.......................................... 95.92 40.08 Cobalt........................................ 13.80 5.91 Oil and grease................................ 1,314.00 788.40 TSS........................................... 2,693.00 1,281.20 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (8) Subpart A--Silver Powder Production. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of silver powder produced English units--pounds per 1,000,000 pounds of silver powder produced -------------- Cadmium....................................... 7.21 3.18 Nickel........................................ 40.70 26.92 Silver........................................ 8.69 3.61 Zinc.......................................... 30.95 12.93 Cobalt........................................ 4.45 1.91 Oil and grease................................ 424.00 254.40 TSS........................................... 869.20 413.40 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (9) Subpart A--Cadmium Hydroxide Production. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of cadmium used English units--pounds per 1,000,000 pounds of cadmium used -------------- Cadmium....................................... 0.31 0.14 Nickel........................................ 1.73 1.14 Zinc.......................................... 1.31 0.55 Cobalt........................................ 0.19 0.08 Oil and grease................................ 18.00 10.80 TSS........................................... 36.90 17.60 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (10) Subpart A--Nickel Hydroxide Production. BPT Effluent Limitations ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/kg of nickel used English units--pounds per 1,000,000 pounds of nickel used -------------- Cadmium....................................... 37.4 16.5 Nickel........................................ 211.2 139.7 Zinc.......................................... 160.6 67.1 Cobalt........................................ 23.1 9.9 Oil and grease................................ 2,200.0 1,320.0 TSS........................................... 4,510.0 2,145.0 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (b) There shall be no discharge allowance for process wastewater pollutants from any battery manufacturing operation other than those battery manufacturing operations listed above.