[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR465.41] [Page 606] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 465--COIL COATING POINT SOURCE CATEGORY--Table of Contents Subpart D--Canmaking Subcategory Sec. 465.41 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available: Subpart D--BPT Effluent Limitations ------------------------------------------------------------------------ Pollutant or pollutant Maximum for any 1 Maximum for monthly property day average ------------------------------------------------------------------------ g (lbs)/1,000,000 cans manufactured ---------------------- Cr............................ 94.60 (0.209) 38.70 (0.085) Zn............................ 313.90 (0.692) 131.15 (0.289) Al............................ 1382.45 (3.048) 688.00 (1.517) F............................. 12792.50 (28.203) 5676.00 (12.514) P............................. 3590.50 (7.916) 1468.45 (3.237) O & G......................... 4300.00 (9.480) 2580.00 (5.688) TSS........................... 8815.00 (19.434) 4192.50 (9.243) pH............................ (\1\) (\1\) ------------------------------------------------------------------------ \1\Within the range of 7.0 to 10 at all times. [48 FR 52399, Nov. 17, 1983; 49 FR 14105, Apr. 10, 1984]