[Code of Federal Regulations]
[Title 40, Volume 28]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR712.28]

[Page 63-64]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 712--CHEMICAL INFORMATION RULES--Table of Contents
 
 Subpart B--Manufacturers Reporting--Preliminary Assessment Information
 
Sec. 712.28  Form and instructions.

    (a) Manufacturers and importers subject to this subpart must submit 
a single EPA Form No. 7710-35, ``Manufacturer's Report--Preliminary 
Assessment Information,'' for each plant site manufacturing or importing 
a chemical substance listed in Sec. 712.30.
    (b) Reporting companies may submit their reports through individual 
plant sites or company headquarters as they choose. A separate form must 
be submitted for each plant site manufacturing the chemical substance.
    (c) Forms must be sent (preferably by certified mail) to the 
Document Control Office (7407), Office of Pollution Prevention and 
Toxics, U.S. Environmental Protection Agency, Room G-

[[Page 64]]

099, 1200 Pennsylvania Ave., NW., Washington, DC 20460, ATTN: 8(a) PAIR 
Reporting.
    (d) Form 7710-35, Manufacturer's Report--Preliminary Assessment 
Information or PAIR form and instructions may be obtained by telephoning 
or writing the Environmental Assistance Division. The telephone number 
and the address of the Environmental Assistance Division is: Phone 
Number (202) 554-1404, TDD (202) 554-0551. Address: Environmental 
Assistance Division (7406), Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave., NW., 
Washington, DC 20460.

[47 FR 26998, June 22, 1982, as amended at 52 FR 20083, May 29, 1987; 53 
FR 12523, Apr. 15, 1988; 60 FR 31921, June 19, 1995; 60 FR 34463, July 
3, 1995]