[Code of Federal Regulations]
[Title 40, Volume 28]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR761.240]

[Page 687]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 761--POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, 
DISTRIBUTION IN COMMERCE, AND USE PROHIBITIONS--Table of Contents
 
 Subpart M--Determining a PCB Concentration for Purposes of Abandonment 
or Disposal of Natural Gas Pipeline: Selecting Sample Sites, Collecting 
        Surface Samples, and Analyzing Standard PCB Wipe Samples
 
Sec. 761.240   Scope and definitions.

    Source: 63 FR 35462, June 29, 1998, unless otherwise noted.


    (a) Use these procedures to select surface sampling sites for 
natural gas pipe to determine its PCB surface concentration for 
abandonment-in-place or removal and disposal off-site in accordance with 
Sec. 761.60(b)(5).
    (b) ``Pipe segment'' means a length of natural gas pipe that has 
been removed from the pipeline system to be disposed of or reused, and 
that is usually approximately 12.2 meters (40 feet) or shorter in 
length. Pipe segments are usually linear.
    (c) ``Pipeline section'' means a length of natural gas pipe that has 
been cut or otherwise separated from the active pipeline, usually for 
purposes of abandonment, and that is usually longer than 12.2 meters in 
length. Pipeline sections may be branched.