[Code of Federal Regulations]
[Title 40, Volume 14]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR80.24]

[Page 585]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 80--REGULATION OF FUELS AND FUEL ADDITIVES--Table of Contents
 
                  Subpart B--Controls and Prohibitions
 
Sec. 80.24  Controls applicable to motor vehicle manufacturers.

    (a) [Reserved]
    (b) The manufacturer of any motor vehicle equipped with an emission 
control device which the Administrator has determined will be 
significantly impaired by the use of gasoline other than unleaded 
gasoline shall manufacture such vehicle with each gasoline tank filler 
inlet having a restriction which prevents the insertion of a nozzle with 
a spout having a terminal end with an outside diameter of 0.930 inch 
(2.363 centimeters) or more and allows the insertion of a nozzle with a 
spout meeting the specifications of Sec. 80.22(f)(2).
    (c) A motorcycle, as defined at 40 CFR 86.402 for the applicable 
model year, is exempt from the requirements of paragraph (b) of this 
section.

[38 FR 26450, Sept. 21, 1973, as amended at 39 FR 34538, Sept. 26, 1974; 
46 FR 50472, Oct. 13, 1981; 48 FR 29692, June 28, 1983; 51 FR 33731, 
Sept. 22, 1986; 61 FR 3838, Feb. 2, 1996; 61 FR 8221, Mar. 4, 1996; 61 
FR 28766, June 6, 1996; 67 FR 36771, May 24, 2002]

[[Page 586]]