[Code of Federal Regulations]
[Title 40, Volume 16]
[Revised as of July 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR86.001-21]

[Page 31-32]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 86--CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES--Table of Contents
 
  Subpart A--General Provisions for Emission Regulations for 1977 and 
 
Sec. 86.001-21  Application for certification.

    Section 86.001-21 includes text that specifies requirements that 
differ from Sec. 86.094-21 or Sec. 86.096-21. Where a paragraph in 
Sec. 86.094-21 or Sec. 86.096-21 is identical and applicable to 
Sec. 86.001-21, this may be indicated by specifying the corresponding 
paragraph and the statement ``[Reserved]. For guidance see Sec. 86.094-
21.'' or ``[Reserved]. For guidance see Sec. 86.096-21.''
    (a) through (b)(1)(i)(B) [Reserved]. For guidance see Sec. 86.094-
21.
    (b)(1)(i)(C) The manufacturer must submit a Statement of Compliance 
in the application for certification which attests to the fact that they 
have assured themselves that the engine family is designed to comply 
with the intermediate temperature cold testing criteria of subpart C of 
this part, and does not unnecessarily reduce emission

[[Page 32]]

control effectiveness of vehicles operating at high altitude or other 
conditions not experienced within the US06 (aggressive driving) and SC03 
(air conditioning) test cycles.
    (b)(1)(i)(C)(1) through (b)(1)(ii)(C) [Reserved]. For guidance see 
Sec. 86.094-21.
    (b)(2) Projected U.S. sales data sufficient to enable the 
Administrator to select a test fleet representative of the vehicles (or 
engines) for which certification is requested, and data sufficient to 
determine projected compliance with the standards implementation 
schedules of Sec. 86.000-8 and 86.000-9. Volume projected to be produced 
for U.S. sale may be used in lieu of projected U.S. sales.
    (b)(3) A description of the test equipment and fuel proposed to be 
used.
    (b)(4)(i) For light-duty vehicles and light-duty trucks, a 
description of the test procedures to be used to establish the 
evaporative emission and/or refueling emission deterioration factors, as 
appropriate, required to be determined and supplied in Sec. 86.001-
23(b)(2).
    (b)(4)(ii) through (b)(5)(iv) [Reserved]. For guidance see 
Sec. 86.094-21.
    (b)(5)(v) For light-duty vehicles and applicable light-duty trucks 
with non-integrated refueling emission control systems, the number of 
continuous UDDS cycles, determined from the fuel economy on the UDDS 
applicable to the test vehicle of that evaporative/refueling emission 
family-emission control system combination, required to use a volume of 
fuel equal to 85% of fuel tank volume.
    (b)(6) through (b)(8) [Reserved]. For guidance see Sec. 86.094-21.
    (b)(9) For each light-duty vehicle, light-duty truck, evaporative/
refueling emission family or heavy-duty vehicle evaporative emission 
family, a description of any unique procedures required to perform 
evaporative and/or refueling emission tests, as applicable, (including 
canister working capacity, canister bed volume, and fuel temperature 
profile for the running loss test) for all vehicles in that evaporative 
and/or evaporative/refueling emission family, and a description of the 
method used to develop those unique procedures.
    (10) For each light-duty vehicle or applicable light-duty truck 
evaporative/refueling emission family, or each heavy-duty vehicle 
evaporative emission family:
    (i) Canister working capacity, according to the procedures specified 
in Sec. 86.132-96(h)(1)(iv);
    (ii) Canister bed volume; and
    (iii) Fuel temperature profile for the running loss test, according 
to the procedures specified in Sec. 86.129-94(d).
    (c) through (j) [Reserved]. For guidance see Sec. 86.094-21.
    (k) and (l) [Reserved]. For guidance see Sec. 86.096-21.

[61 FR 54886, Oct. 22, 1996]