[Code of Federal Regulations] [Title 40, Volume 18] [Revised as of July 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR94.5] [Page 592-593] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 94--CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES-- Table of Contents Subpart A--General Provisions for Emission Regulations for Compression- Ignition Marine Engines Sec. 94.5 Reference materials. We have incorporated by reference the documents listed in this section. The Director of the Federal Register approved the incorporation by reference as prescribed in 5 U.S.C. 552(a) and 1 CFR part 51. Anyone may inspect copies at the U.S. EPA, Air and Radiation Docket and Information Center, 1301 Constitution Ave., NW., Room B102, EPA West Building, Washington, DC 20460 or the Office of the Federal Register, 800 N. Capitol St., NW., 7th Floor, Suite 700, Washington, DC. (a) ASTM material. Table 1 of Sec. 94.5 lists material from the American Society for Testing and Materials that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the sections of this part where we reference it. Anyone may purchase copies of these materials from the American Society for Testing and Materials, 100 Barr Harbor Dr., PO Box C700, West Conshohocken, PA 19428. Table 1 follows: Table 1 of Sec. 94.5.--ASTM Materials ------------------------------------------------------------------------ Document No. and name Part 94 reference ------------------------------------------------------------------------ ASTM D 86-01, Standard Test Method for 94.108 Distillation of Petroleum Products at Atmospheric Pressure. ASTM D 93-02, Standard Test Methods for 94.108 Flash-Point by Pensky-Martens Closed Cup Tester. ASTM D 129-00, Standard Test Method for 94.108 Sulfur in Petroleum Products (General Bomb Method). ASTM D 287-92 (Reapproved 2000), Standard 94.108 Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). ASTM D 445-01, Standard Test Method for 94.108 Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity). ASTM D 613-01, Standard Test Method for 94.108 Cetane Number of Diesel Fuel Oil. ASTM D 1319-02a, Standard Test Method for 94.108 Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption. ASTM D 2622-98, Standard Test Method for 94.108 Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry. ASTM D 5186-99, Standard Test Method for 94.108 Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography. ASTM E 29-02, Standard Practice for Using 94.2 Significant Digits in Test Data to Determine Conformance with Specifications. ------------------------------------------------------------------------ (b) ISO material. Table 2 of Sec. 94.5 lists material from the International Organization for Standardization that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the section of this part where we reference it. Anyone may purchase copies of these materials from the International Organization for Standardization, Case Postale 56, CH-1211 Geneva 20, Switzerland. Table 2 follows: Table 2 of Sec. 94.5.--ISO Materials ------------------------------------------------------------------------ Document No. and name 40 CFR part 94 reference ------------------------------------------------------------------------ ISO 8178-1, Reciprocating internal 94.109 combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions, 1996. ------------------------------------------------------------------------ (c) IMO material. Table 3 of Sec. 94.5 lists material from the International Maritime Organization that we have incorporated by reference. The first column lists the number and name of the material. The second column lists the section of this part where we reference it. Anyone may purchase copies of these materials from the International Maritime Organization, 4 Albert Embankment, London SE1 7SR, United Kingdom. Table 3 follows: [[Page 593]] Table 3 of Sec. 94.5.--IMO Materials ------------------------------------------------------------------------ Document No. and name 40 CFR part 94 reference ------------------------------------------------------------------------ Resolution 2--Technical Code on Control of 94.2, 94.11, 94.108, Emission of Nitrogen Oxides from Marine 94.109, 94.204, 94.211, Diesel Engines, 1997. 94.1004. ------------------------------------------------------------------------ [68 FR 9781, Feb. 28, 2003]