[Code of Federal Regulations]
[Title 47, Volume 2]
[Revised as of October 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 47CFR24.53]

[Page 231]
 
                       TITLE 47--TELECOMMUNICATION
 
                    CHAPTER I--FEDERAL COMMUNICATIONS
                         COMMISSION (CONTINUED)
 
PART 24--PERSONAL COMMUNICATIONS SERVICES--Table of Contents
 
                     Subpart C--Technical Standards
 
Sec. 24.53  Calculation of height above average terrain (HAAT).

    (a) HAAT is determined by subtracting average terrain elevation from 
antenna height above mean sea level.
    (b) Average terrain elevation shall be calculated using elevation 
data from a 30 arc second or better Digital Elevation Models (DEMs). DEM 
data is available from United States Geological Survey (USGS). The data 
file shall be identified. If 30 arc second data is used, the elevation 
data must be processed for intermediate points using interpolation 
techniques; otherwise, the nearest point may be used. If DEM data is not 
available, elevation data from the Defense Mapping Agency's Digital 
Chart of the World (DCW) may be used.
    (c) Radial average terrain elevation is calculated as the average of 
the elevation along a straight line path from 3 to 16 kilometers 
extending radially from the antenna site. At least 50 evenly spaced data 
points for each radial shall be used in the computation.
    (d) Average terrain elevation is the average of the eight radial 
average terrain elevations (for the eight cardinal radials).
    (e) The position location of the antenna site shall be determined to 
an accuracy of no less than [plusmn]5 meters in both the horizontal 
(latitude and longitude) and vertical (ground elevation) dimensions with 
respect to the National Geodetic Reference System.

[58 FR 59183, Nov. 8, 1993; 59 FR 15269, Mar. 31, 1994]