[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR230.27]

[Page 341]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 230--STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table of Contents
 
                  Subpart B--Boilers and Appurtenances
 
Sec. 230.27  Maximum shearing strength of rivets.

    The maximum shearing strength of rivets per square inch of cross 
sectional area shall be taken as follows:

------------------------------------------------------------------------
                                                                 Pounds
                                                                   per
                            Rivets                               square
                                                                  inch
------------------------------------------------------------------------
Iron Rivets in Single Shear...................................    38,000
Iron Rivets in Double Shear...................................    76,000
Steel Rivets in Single Shear..................................    44,000
Steel Rivets in Double Shear..................................    88,000
------------------------------------------------------------------------