[Code of Federal Regulations]
[Title 49, Volume 4]
[Revised as of October 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR235.12]

[Page 498]
 
                        TITLE 49--TRANSPORTATION
 
       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 
                             TRANSPORTATION
 
PART 235--INSTRUCTIONS GOVERNING APPLICATIONS FOR APPROVAL OF A 
DISCONTINUANCE OR MATERIAL MODIFICATION OF A SIGNAL SYSTEM OR RELIEF 
FROM THE REQUIREMENTS OF PART 236--Table of Contents
 
Sec. 235.12  Additional required information-prints.

    (a) A print or prints, size 8 inches by 10\1/2\ inches, or 8\1/2\ 
inches by 11 inches, or folded to 8 inches by 10\1/2\ inches or to 8\1/
2\ inches by 11 inches, shall be furnished with each application.
    (b) The print or prints shall be to scale or by indicated 
dimensions, using Association of American Railroads graphic symbols.
    (c) The following information shall be shown on the print or prints:
    (1) Present and proposed arrangement of tracks and signal 
facilities;
    (2) Name of carrier;
    (3) Operating division;
    (4) Place and State; and
    (5) Timetable directions of movements.
    (d) If stopping distances are involved, the following information 
shall also be shown:
    (1) Curvature and grade;
    (2) Maximum authorized speeds of trains; and
    (3) Length of signal control circuits for each signal indication 
displayed.
    (e) The following color scheme is suggested on prints:
    (1) Installations, relocations, and added signal aspects should be 
colored, preferably in yellow;
    (2) Removals, discontinuances, and abandonments should be colored, 
preferably in red; and
    (3) Existing facilities not pertinent to change proposed in 
application should be shown uncolored.

(Approved by the Office of Management and Budget under control number 
2130-0042)