[Code of Federal Regulations]
[Title 49, Volume 6]
[Revised as of October 1, 2003]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR665.13]

[Page 116]
 
                        TITLE 49--TRANSPORTATION
 
                             TRANSPORTATION
 
PART 665--BUS TESTING--Table of Contents
 
                    Subpart B--Bus Testing Procedures
 
Sec. 665.13  Test report and manufacturer certification.

    (a) Upon completion of testing, the operator of the facility shall 
provide a test report to the entity that submitted the bus for testing.
    (b)(1) A manufacturer of a new bus model or a bus produced with a 
major change in component or configuration shall provide a copy of the 
test report to a recipient during the point in the procurement process 
specified by the recipient.
    (2) A manufacturer who releases a report under paragraph (b)(1) of 
this section also shall provide notice to the operator of the facility 
that the report is available to the public.
    (c) If a bus model subject to a test report has a change that is not 
a major change under this part, the manufacturer shall advise the 
recipient during the procurement process and shall include description 
of the change and its basis for concluding that it is not a major 
change.
    (d) A test report shall be available publicly once the owner of the 
report makes it available during the recipient's procurement process. 
The operator of the facility will have available for distribution copies 
of all the publicly available reports.
    (e) The test report is the only information or documentation that 
will be made available publicly in connection with any bus model tested 
at the facility.