[Code of Federal Regulations]
[Title 18, Volume 1]
[Revised as of April 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 18CFR12.39]

[Page 202]
 
           TITLE 18--CONSERVATION OF POWER AND WATER RESOURCES
 
  CHAPTER I--FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY
 
PART 12_SAFETY OF WATER POWER PROJECTS AND PROJECT WORKS--Table of Contents
 
             Subpart D_Inspection by Independent Consultant
 
Sec. 12.39  Taking corrective measures after the report.

    (a) Corrective plan and schedule. (1) Not later than 60 days after 
the report of the independent consultant is filed with the Regional 
Engineer, the licensee must submit to the Regional Engineer three copies 
of a plan and schedule for designing and carrying out any corrective 
measures that the licensee proposes.
    (2) The plan and schedule may include any proposal, including taking 
no action, that the licensee considers a preferable alternative to any 
corrective measure recommended in the report of the independent 
consultant. Any proposed alternative must be accompanied by the 
licensee's complete justification and detailed analysis and evaluation 
in support of that alternative.
    (b) Carrying out the plan. The licensee must complete all corrective 
measures in accordance with the plan and schedule submitted to, and 
approved or modified by, the Regional Engineer.
    (c) Extension of time. For good cause shown, the Regional Engineer 
may extend the time for filing the plan and schedule required by this 
section.