[Code of Federal Regulations]
[Title 27, Volume 1]
[Revised as of April 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 27CFR20.94]

[Page 453-454]
 
            TITLE 27--ALCOHOL, TOBACCO PRODUCTS AND FIREARMS
 
 CHAPTER I--ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE 
                                TREASURY
 
PART 20_DISTRIBUTION AND USE OF DENATURED ALCOHOL AND RUM
--Table of Contents
 
              Subpart F_Formulas and Statements of Process
 
Sec. 20.94  Statement of process.

    (a) Manufacturers shall submit a statement of process on Form 
5150.19, in accordance with paragraph (b) of this section, covering the 
following activities:
    (1) If specially denatured spirits are used for laboratory or 
mechanical purposes, other than use of S.D.A. Formula No. 3-A, 3-C, or 
30 for laboratory or mechanical purposes not in the development of a 
product;
    (2) If specially denatured spirits are used in a manufacturing 
process in which none of the specially denatured spirits remains in the 
finished product;
    (3) If specially denatured spirits, completely denatured alcohol, or 
articles are used in a manufacturing process and are to be recovered; or
    (4) If recovered denatured spirits are to be redenatured.
    (b) The manufacturer shall submit a separate Form 5150.19 for each 
activity described in paragraph (a) of this section describing the 
process completely.
    (1) If specially denatured spirits are used for laboratory or 
mechanical purposes, other than use of S.D.A. Formula No. 3-A, 3-C, or 
30 for laboratory

[[Page 454]]

or mechanical purposes not in the development of a product, the Form 
5150.19 shall identify the formula number of specially denatured 
spirits, a description of the laboratory or mechanical use, and the 
approximate annual quantity to be used.
    (2) If the Form 5150.19 is submitted covering activities described 
in paragraphs (a)(2), (a)(3), or (a)(4) of this section, the Form 
5150.19 shall also contain the following information:
    (i) Flow diagrams shall be submitted with the Form 5150.19 clearly 
depicting the equipment in its relative operating sequence, with 
essential connecting pipelines and valves. All major equipment shall be 
identified as to its use. The direction of flow through the pipelines 
shall be indicated in the flow diagram. The flow diagram, shall be 
accompanied by a written description of the flow of materials through 
the system.
    (ii) The statement of process shall describe the chemical 
composition of the recovered spirits. The statement of process shall be 
accompanied by a statement of the intended use of the recovered spirits.