[Code of Federal Regulations] [Title 33, Volume 2] [Revised as of July 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 33CFR183.335] [Page 874-875] TITLE 33--NAVIGATION AND NAVIGABLE WATERS CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PART 183_BOATS AND ASSOCIATED EQUIPMENT--Table of Contents Subpart H_Flotation Requirements for Outboard Boats Rated for Engines of 2 Horsepower or Less Sec. 183.335 Level flotation test without weights for persons capacity. When the conditions prescribed in Sec. 183.320 (a) and (d) through (g) are met, the boat must float in fresh, calm water as follows: (a) The angle of heel does not exceed 10 degrees from the horizontal. (b) Any point on either the forward or aft reference area is above the surface of the water. (c) The reference depth at the reference area that is opposite the reference area that is above the surface of the water is 6 inches or less. [CGD 75-168, 42 FR 20245, Apr. 18, 1977, as amended by USCG-1999-5832, 64 FR 34716, June 29, 1999] Table 4 to Subpart H of Part 183--Weights (Pounds) of Outboard Motor and Related Equipment for Various Boat Horsepower Ratings ---------------------------------------------------------------------------------------------------------------- Motor and control weight Battery weight Full ---------------------------------------------------- portable Boat horsepower rating fuel tank 1+3+5 Dry Swamped Dry Submerged weight ---------------------------------------------------------------------------------------------------------------- Column No. -------------- 1 2 3 4 5 6 -------------- 0.1 to 2............................ 25 20 ........... ........... ........... 25 2.1 to 3.9.......................... 40 34 ........... ........... ........... 40 4.0 to 7............................ 60 52 ........... ........... 25 35 7.1 to 15........................... 90 82 20 11 50 160 15.1 to 25.......................... 125 105 45 25 50 220 25.1 to 45.......................... 170 143 45 25 100 315 45.1 to 60.......................... 235 195 45 25 100 380 60.1 to 80.......................... 280 235 45 25 100 425 80.1 to 145......................... 405 352 45 25 100 550 145.1 to 275........................ 430 380 45 25 100 575 275.1 and up........................ 605 538 45 25 100 750 Transoms designed for twin motors 50.1 to 90.......................... 340 286 90 50 100 530 90.1 to 120......................... 470 390 90 50 100 660 120.1 to 160........................ 560 470 90 50 100 750 160.1 to 290........................ 810 704 90 50 100 1000 290.1 to 550........................ 860 760 90 50 100 1050 550.1 and up........................ 1210 1076 90 50 100 1400 ---------------------------------------------------------------------------------------------------------------- [CGD 83-012, 49 FR 39328, Oct. 5, 1984] [[Page 875]] Figures to Subpart H of Part 183 [GRAPHIC] [TIFF OMITTED] TC18OC91.022