[Code of Federal Regulations]
[Title 33, Volume 2]
[Revised as of July 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 33CFR183.5]

[Page 859-860]
 
                TITLE 33--NAVIGATION AND NAVIGABLE WATERS
 
   CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED)
 
PART 183_BOATS AND ASSOCIATED EQUIPMENT--Table of Contents
 
                            Subpart A_General
 
Sec. 183.5  Incorporation by reference.

    (a) Certain materials are incorporated by reference into this part 
with the approval of the Director of the Federal Register in accordance 
with 5 U.S.C. 552(a). To enforce any edition other than the one listed 
in paragraph (b) of this section, notice of change must be published in 
the Federal Register and the material made available to the public. All 
approved material is available for inspection at the Recreational 
Boating Product Assurance Division, Washington, DC 20593-0001, and at 
the National Archives and Records Administration (NARA). For information 
on the availability of this material at NARA, call 202-741-6030, or go 
to: http://www.archives.gov/federal--register/code--of--federal--
regulations/ibr--locations.html. All approved material is available from 
the sources listed in paragraph (b) of this section.
    (b) The materials approved for incorporation by reference in this 
part, and the sections affected are:

[[Page 860]]



Air Movement and Control Association, 30
 W. University Drive, Arlington Heights,
 IL 60004:
    AMCA 210-74: Laboratory Methods of      Sec. 183.610
     Testing Fans for Ratings--1974.
American Boat and Yacht Council, Inc.,
 3069 Solomons Island Road, Edgewater,
 Maryland 21037-1416:
    ABYC A-16 Electric Navigation Lights-   Sec. 183.810
     1997.
American Society for Testing and
 Materials, 100 Barr Harbor Drive, West
 Conshohocken, PA 19428-2959:
    ASTM D 471-96, Standard Test Method     Sec. Sec. 183.114;
     for Rubber Property--Effect of          183.516; 183.607; 183.620
     Liquids.
    ASTM D 1621-94, Standard Test Method    Sec. 183.516
     for Compressive Properties of Rigid
     Cellular Plastics.
    ASTM D 1622-93, Standard Test Method    Sec. 183.516
     for Apparent Density of Rigid
     Cellular Plastics.
    ASTM D 2842-97, Standard Test Method    Sec. 183.114
     for Water Absorption of Rigid
     Cellular Plastics.
Institute of Electrical and Electronics,
 Engineers, Inc., 445 Hoes Lane,
 Piscataway, NJ 08854:
    IEEE 45 IEEE Recommended Practice for   Sec. 183.435
     Electrical Installations on
     Shipboard--1983. Cable Construction.
National Fire Protection Association, 1
 Batterymarch Park, Quincy, MA 02269:
    NFPA No. 70 National Electrical Code--  Sec. 183.435
     1987. Articles 310 & 400.
Naval Publications Forms Center, Customer
 Service--Code 1052, 5801 Tabor Avenue,
 Philadelphia, PA 19120:
    MILSPEC-P-21929B Plastic Material,      Sec. 183.516
     Cellular Polyurethane, Foam-In-Place,
     Rigid--1970.
Society of Automotive Engineers, Inc., 400
 Commonwealth Drive, Warrendale, PA 15096:
    SAE J378 Marine Engine Wiring--1984...  Sec. 183.430
    SAE J557 High Tension Ignition Cable--  Sec. 183.440
     1968.
    SAE J1127 Battery Cable--1980.........  Sec. 183.430
    SAE J1128 Low Tension Primary Cable--   Sec. 183.430
     1975.
    SAE J1527DEC85 Marine Fuel Hoses--1985  Sec. 183.540
Underwriters Laboratories, Inc. (UL), 12
 Laboratory Drive, Research Triangle Park,
 NC 27709-3995:
    UL 1114 Marine (USCG Type A) Flexible   Sec. 183.540
     Fuel Line Hose--1987.
    UL 1128 Marine Blowers--1977..........  Sec. 183.610
    UL 1426 Cables for Boats--1987........  Sec. 183.435



[CGD 87-009, 53 FR 36971, Sept. 23, 1988, as amended by CGD 96-026, 61 
FR 33670, June 28, 1996; USCG-1999-5151, 64 FR 67176, Dec. 1, 1999; 
USCG-2000-7223, 65 FR 40059, June 29, 2000; USCG-1999-6580, 66 FR 55091, 
Nov. 1, 2001; 69 FR 18803, Apr. 9, 2004; USCG-2004-18057, 69 FR 34926, 
June 23, 2004]